Weco E.3: intelligent revolution

Get the E3 all-in-one edging solution featuring a 7” VGA touch-screen, a Smooth ScanTM scanner, a digital blocker, and drilling, grooving, shape modification and other functions, for jobs where no compromise is acceptable.

Product Description

Finishing.

The small edging wheels, 90 mm in diameter, are ideal for high-curve frames. They also enable the edging of all types of materials (CR39, PC, Trivex, Hi-index, glass).

The superpolish edging wheel yields particularly brilliant results for the polishing of bevel .

The front and rear safety-bevel is also one of the essential finishing operations, as is a specific edging cycle for superhydrophobic topcoatings.

The E.3 S.line guarantees you protection against axis slippage during all finishing phases

 

The multi-axis tracer precisely records the frame’s characteristics, its shape and its curvature.

This patented tracer, which comes with a protective cover, is shielded from dust and any water spraying. It enables the operator to input metal and plastic frames, patterns and demonstration lenses.

Frame positioning is particularly simple, and clamping is done manually to prevent any distortion of ultra-thin frames.

Realignment is done gently during clamping operation[Smooth Scan].

In addition, frame thickness and groove positioning are measured in order to obtain flawless adaptation of the lens in the frame.

The cycle time is particularly short: 1 minute for both eyes..

 

Thanks to the Shapemaker shape modification software, you can ensure comfort and satisfaction for your customers.

Shapemaker enables you to produce custom jobs in just a few clicks and to provide personalised service to your customers.

Proportional modification : used to increase or reduce a shape proportionally.

Vertical modification : probably the most widely used shape modification, for near portion adaptation with a Supra or rimless frame.

Horizontal modification : used to adapt your rimless frames to all facial types.

 

The digital blocker combines on-screen viewing and easy manipulation of blocks, thanks to a unique handling system.

The results are free of parallax and prismatic effects.

Blocking is simplified, and block insertion is made easier, thanks to the error-proof slot and the possibility of viewing block position and insertion.

 

Key points

NEW / Shape rotation function.

The new rotation function found in the Shape Modification menu allows the shape to be rotated by a specified angle as entered by the operator. This helps to correct pattern tracings with a slight axis error.

 

NEW / Determination of Drill Hole Coordinates with LiveView

An image of the demo-lens in right position with the traced shape is taken and the drill holes can be inserted easily by hand. It works in either distance from the boxing center, or from the edge of the lens. 200 shapes can be stored in a separate database for further use.

 

NEW / Parallel Job Procedure

Two Jobs can now be processed in parallel mode for faster results. This enables you to trace a frame while the lens of another frame is being edged. During processing (Tracing, Shape Management, Blocking and Edging)

you are able to have two jobs in parallel mode that can be accessed by simply pressing on the job number to toggle between the active and passive job.